Loading

Cold Glue, Hot Melt_Labelling machine Submit your Inquiry

 

Labeller – Cold Glue, Hot Melt

Usually, cold glue is glue used for Cut and Stack spot labels.

Hot melt is glue heated to around 300 degrees and mainly used for full wrap labels.

Three are various automatic labelling machines which are configured to apply labels by hot-melt glue.
They usually apply only wrap-around paper or OPP pre-cut labels on cylindrical or shaped bottles, in PET and on glass. The containers are placed on the conveyor at the machine in-feed and those are spaced by an in-feed screw and transferred on the centralcarrousel where they are positioned correctly on platforms and kept at the correct spot bypress-cap heads.Hot Melt applicator with solenoid controlled nozzles apply adhesive to the container that picks thelabel up directly from the magazine.Hot Melt vertical nozzle applies a strip ofadhesive of the final edge of the label in order to allow the labelwraparound.

The passage of rotating containers and an adequatewiping-section allows a perfect closure of overlapping. Thedischarge star wheel finally picks the containers up and

transfers those on the discharge conveyor.

For the cold glue, the machine works almost the same way as the hot melt, the major difference being cold glue is used instead of hot melt. 

....
Show More

TripleMExpo
Polyclad 200 Roll Fed Labeler

Speeds up to 200 C.P.M
Quick Format Changeover
HMI Touch Panel Control
368mm Dia...

Details
TripleMExpo
Ploy Star-204 Roll Fed Labeler

Speeds up to 350 C.P.M
Quick Format Changeover
HMI Touch Panel Control(with Memory...

Details
TripleMExpo
Polycad 900 Roll Fed Labeler

Speeds up to 500 C.P.M
Quick Format Changeover
HMI Touch Panel Control
632mm D...

Details