Loading

Sleevers

The principles of operation of the sleever start with unlabeledcontainersthat are fed to the machine via an infeed conveyor and then separated / metered by a rotating feed screw. The shrink sleeve labels are supplied from a roll in the form of a continuous web. There are either one or two reels of film to wrapthe product or groups of products with a loose piece of film. The labels in web form are either opened and are put into a tube by a mandrel and fed precisely OR the sleeve is formed by using two reels of film which are joined to form a webaround the product. Usually, the registration mark on a printed graphic helps in ensuring that the sleeve is cut precisely and applied to the container. Product is then transported by the use of a conveyor to a steam tunnel where controlled steam heat shrinks the sleeve tightly onto the container in an enclosed steam tunnel. Containers then exit the shrink tunnel through a discharge conveyor.

 

Stretch Sleevers / labelers are very similar to shrink sleevers except that the label is

stretched over the product and no heat is required. Both types of labelers are referred to as sleever.

....
Show More

TripleMExpo
WM/WS

Stainless steel construction
Mechanical or servo motion
Fully automatic, continuou...

Details
TripleMExpo
WAE

Stainless steel construction
Compact, 9 frame with leveling feet and casters
Easy t...

Details
TripleMExpo
MK-CMS

Upgrade to stainless steel
Standard No Product, No Carton, No Load feature
Intermitt...

Details